Double side planer VH-MB2063D
Device Picture
Main Technical Data
|
Model parameters |
VH-MB2063D |
|
Max.working width (mm) |
635 |
|
Max.working thickness (mm) |
200 |
|
Min.working thickness(mm) |
15 |
|
Min.working length(mm) |
320 |
|
Spindle rotation(mm) |
4500 |
|
Speed with inverter(mm) |
5～20 |
|
Spindle diameter(mm) |
∮110 |
|
Top cutter motor(mm) |
11 |
|
Bottom cutter motor(mm) |
7.5 |
|
Feed motor power(kw) |
2.2 |
|
Lifting motor power(kw) |
0.37 |
|
Total motor power(kw) |
21.07 |
|
Dimension(LXWXH) |
2700x1268x1680 |
|
Weight(kg) |
2420 |
Detail
ELECTRONIC/PNEUMATIC/CONTROL CONFIGURATION
Feeding frequency converter
Digital display, convenient operation, reduce, energy saving, reduce mechanical variable speed wear
Centralized oil feed system
The machine is equipped with a centralized oil feeding system to facilitate the maintenance and lubrication of each lifting system
(MB2063 is standard configuration, others are optional configuration)
electric lubrication device
Automatic oiling device can ensure that the machine is always in a state of lubrication when working.
Alarm detector, when the feed chain overload or fall off, the alarm switch will give a signal to alarm。
(2063, 2045 standard)
feeding mechanism is equipped with clutch, can prevent overload, to ensure the safe use of the machine.
(2063, 2045 standard).
Quick thickness setting. Simply place the preset thickness wood on the micro switch to make simple thickness setting.
(MB2063 is standard, others are optional)
Magnetic gate induction switch, magnetic gate transfer for thickness display
Sensor, the accuracy is much higher than the traditional proximity sensor.
The product is equipped with imported digital display device, which can be operated in
The processing thickness is directly operated on the panel, the accuracy is up to 0.05mm;At the same time, the upper and lower planing motor is equipped with an ammeter, which is very intuitive to observe the work
Is overloaded when.(optional)
Rear operation box, machine response abnormal emergency stop
Stop, or only stop and start feeding.
Processing Technic
Machine body has h high rigidity integrated
Machine body Was made of cast iron with shock absorption properties
Ensure smooth operation of cutter shaft and feed system.
Sophisticated pressing equipment
Meticulous production, to ensure that every part is nearly perfect
Japanese brand Four axis linkage machining center
All shaft frame, reducer and other accessories, the company is equipped with its own machining center processing, to ensure precision accessories
Main spindle with dynamic balance test
Each spindle is tested for movement balance. Equipped with imported SKF bearing to ensure high precision and smooth operation of the cutter shaft
Qualification
